13 December 2017
The chamber forms part of the surface water drainage system and is also the authorised minor discharge route for waste condensate water being discharged from the power station. Although the chamber was intact, there were voids in the mortar and cracking around pipe penetrations. The defects needed to be repaired to ensure environmental compliance is maintained. A protective lining was required that would tolerate the heat from the water being discharged.
CSC Services repaired the chamber and lined it with Cemprotec E942 from Flexcrete. This water based cementitious system gives a hard, durable coating with excellent resistance to water, chloride ions, oxygen and aggressive chemicals.
The drain was blocked and allowed to dry before work could commence. CSC Services also installed an over-pumping system to isolate the chamber. It was imperative that the specified coating had a rapid curing time to allow the speeded return to service of the surface water drainage system.
Speaking about the work, Alan Smith, Project Engineer from Dungeness B Power Station said:
“CSC Services worked with EDF Energy’s Investment Delivery team in recommending and agreeing suitable products for the chamber refurbishment. The work required confined space access and was subject to plant isolation, which was delayed by one day. Despite the delay, CSC Services completed the work to a very high standard and within programme.”
Images from the work undertaken are shown below. For more information about the range of services offered please visit www.csc-services.co.uk
General condition of the chamber before the cementitious system was installed
The chamber as the cementitious system was installed